ADAS calibration
ADAS calibration after a windshield replacement, explained
Many cars read the road through a camera behind the windshield. Learn what ADAS calibration is and why a new windshield needs it.
Faith Auto Glass & Tinting · 4 min read

On this page9 sections
If your car has lane assist or automatic braking, a camera behind the windshield often runs those features. Replace the glass and that camera must be aimed again. That step is ADAS calibration.
What ADAS means
ADAS stands for advanced driver assistance systems. NHTSA says some of these technologies warn you of a crash risk, while others act to avoid a crash. Common examples include:
- Forward collision warning, which warns you when you close in on the vehicle ahead.
- Automatic emergency braking, which brakes to avoid or reduce a forward crash.
- Lane departure warning, which alerts you when the car drifts out of its lane.
- Lane keeping assistance, which steers the car back toward its lane.
- Adaptive cruise control, which holds a set distance behind the vehicle ahead.
- Automatic high beams, which switch between low and high beams for you.
Many of these systems read the road with cameras. IIHS says lane departure systems use cameras to track the car's position within the lane. Front crash prevention can use cameras, radar or lidar. On many cars the camera is mounted on the windshield.
What the research shows
The Insurance Institute for Highway Safety (IIHS) studied front crash prevention. Systems with forward collision warning and automatic braking cut rear-end crashes in half. Forward collision warning alone reduced them by 27%.
Those gains depend on the camera seeing the road the way the system expects. IIHS also notes that drivers still need to be ready to respond to warnings and interventions.
Why a new windshield means calibration
On Honda models, the camera sits right above the rearview mirror, according to Honda's service documents. Camera types differ by model and year.
Any time a new windshield is installed, the camera must be calibrated. Calibration restores the camera to the automaker's specifications. Honda's procedure says its cameras must be aimed after the windshield is removed or replaced.
When else a camera needs aiming
A windshield is not the only trigger. Honda's table lists these cases for its forward cameras:
- The windshield was removed and installed, or replaced.
- The camera unit was removed and installed, or replaced.
- A collision repair required structural body repair.
- The airbags (SRS) deployed.
- A diagnostic code shows the last aiming did not finish.
Choosing the glass
Honda adds a warning about glass. Windshields for camera-equipped models have view windows near the top for the camera. Aftermarket glass may distort what the camera sees. Honda says the replacement must be a genuine Honda windshield.
Other automakers set their own rules. We carry both OEM (original equipment) and OEE (original equipment equivalent) glass. Tell us your car, and we will check which type it needs.
Static and dynamic calibration
Automakers specify the method. Calibration equipment supports both:
| Method | How it works |
|---|---|
| Static | The car stays still while the camera is aimed at fixed targets. Honda models use 2 or 3 targets. |
| Dynamic | The camera is aimed while the car drives on the road, using lane markers. |
Some models need 1 method, and some need both. Honda says a few later models need only static aiming.
Our trained technicians use professional calibration equipment. They follow the vehicle and manufacturer procedures.
What the car needs on calibration day
Honda's aiming procedure sets conditions for the car. Other automakers set their own. Honda asks for:
- Correct tire sizes and pressures.
- A full fuel tank.
- Excess cargo removed.
- Nothing on the dashboard, hood or windshield.
- No dirt or debris around the camera.
Honda also says to aim in a well-lit area such as inside the shop. It advises against aiming outside, because certain weather conditions may affect the results.

How to tell if your car has a windshield camera
- Look near the rearview mirror for a camera housing.
- Check your owner's manual. NHTSA tells drivers to review it for the technology and safety features on their car.
- Ask us. Add your plate or VIN to your quote and we can check your car.
“All these features take time to calibrate and require precision work. Well, they did do a great job.”
Questions to ask any glass shop
- Does my car need calibration after a windshield replacement?
- Will you use static or dynamic calibration for my car?
- Is the glass OEM or equivalent, and does my automaker accept it?
Calibration is part of the job, so ask your insurer how it handles the cost. Our insurance claims page explains how we work with insurers. You can also read about ADAS calibration and windshield replacement.
Chips and cracks also change what a camera sees. Our guide to repair or replace shows when each applies.
Get a glass quote online. Add your plate or VIN so we can match the right glass to your car.
Get a quote




