PPF
Paint protection film vs ceramic coating: pick one, or both
Film guards against rock chips. Ceramic coating makes paint slick and easy to wash. Learn how they differ and when to use both.
Faith Auto Glass & Tinting · 4 min read

On this page6 sections
Paint protection film (PPF) and ceramic coating both protect paint. They do different jobs. One is a physical film. The other is a liquid coating. Many owners use both. You may also hear PPF called a clear bra. It is the same product. Most of the product facts below come from XPEL, which makes the films and coatings we install.
What paint protection film does
PPF is a transparent polyurethane film. It protects paint from scratches, chips, stains and environmental damage. It absorbs the impact of rocks and debris. It can also reduce the impact of minor door dings, though not severe ones.
XPEL Ultimate Plus is about 8 mil thick. Its clear coat uses elastomeric polymers that let minor scratches and swirls heal over time. Deeper scratches that cut through the film may not fully heal. We are an authorized XPEL installer.
The film is a sacrificial layer. It takes the wear so your paint does not. It typically lasts 5 to 10 years, depending on film quality, installation and conditions.
Ultimate Plus has no hydrophobic topcoat. XPEL Ultimate Fusion adds one, so water beads and the surface cleans more easily. In most cases, film adds a slight gloss.
XPEL Stealth is a film with a satin finish. A ceramic coating over it will not make it glossy.
What ceramic coating does
A ceramic coating is a liquid that bonds to your paint. It is a silicon dioxide polymer that forms a glass-like layer. That layer repels water, dirt and contaminants. It also adds shine.
A coating helps keep paint from fading and oxidizing. It also makes paint more resilient to minor scratches and swirl marks. Film is thicker, so it is generally better for chips and scratches.
Ceramic coating has 2 downsides. One is the upfront cost. The other is that it needs professional application for the best result.
A coating also needs upkeep, such as proper washing. Removing one takes polishing or an abrasive method, because it is built to last.
Side by side
| Paint protection film | Ceramic coating | |
|---|---|---|
| What it is | Clear polyurethane film | Liquid coating that bonds to the paint |
| Best at | Rock chips, scratches and stains | Water beading, easy washing, UV and oxidation protection |
| Rock chips | Absorbs the impact | Not its job. Film is better for chips |
| XPEL warranty | 10 years on Ultimate Plus | 4 years on Fusion Plus Classic, 8 years on Fusion Plus Premium v2 |
| Warranty covers | Yellowing, peeling and lifting of the film. It covers the film, not the paint under it | Oxidation, loss of gloss, UV damage, color fading |
| Warranty excludes | Rock and road debris impact, collisions, improper washing | Scratches, chips, stones, water spots, improper washing |
| Upkeep | Maintain it as XPEL instructs | Yearly inspection by an XPEL certified installer |
Read the warranty before you buy
XPEL covers the film for 10 years against yellowing, peeling and lifting. It covers the film, not the paint under it.
A warranty covers defects in the product. It is not insurance against damage. The film warranty excludes damage from outside forces, including the impact of rocks or road debris.
All 3 warranties apply only to product that a professional installed as XPEL recommends. They also exclude water spots and areas not re-wrapped or re-coated after paint or body repair.
The Fusion Plus Classic and Premium v2 warranties cap XPEL's replacement cost. The cap is the lesser of the coating application cost or $1,000.
Ceramic coating warranties also come with a condition. A certified installer must inspect the car once a year, within 30 days before or after each anniversary of installation. Missing it voids the warranty. The owner pays any inspection fee.
Ask any installer for the full warranty text before you commit.

Care and removal
For film, a 2-bucket hand wash with XPEL Foam Soap and a soft microfiber mitt is best. Frequent automatic washes with harsh brushes can damage film over time, so use a touchless wash or wash by hand. For light scratches in the surface, a heat gun or warm water activates the film's self-healing.
Most bubbles from installation go away within a few days to a few weeks as the adhesive cures. Film removed correctly does not harm the paint.
Choosing film, coating or both
- Choose film if rocks and scratches worry you most, such as on a car that sees highway miles.
- Choose coating if you want easy washing and a glossy finish, and chips worry you less.
- Combine them for both benefits. A coating over film adds a layer against contaminants and makes the surface easier to clean.
XPEL Fusion Plus ceramic coating will not void the PPF warranty. The film warranty does exclude non-XPEL ceramic coatings, so ask your installer which product goes over the film.
Learn more on our paint protection film and ceramic coating pages. If chips are your worry, our guide to repairing or replacing a windshield explains the glass side.
Get a PPF quote online. Tell us your car and the panels you want covered, and ask us about adding a ceramic coating.
Get a quoteSources
- XPEL, Frequently asked questions (PPF and ceramic coating)xpel.com
- XPEL Ultimate Plus technical data sheetxpel.com
- XPEL Ultimate Plus and Stealth paint protection film warranty, R1224assets.contentstack.io
- XPEL Fusion Plus Classic ceramic coating warranty, R1224assets.contentstack.io
- XPEL Fusion Plus Premium v2 ceramic coating warranty, R1224assets.contentstack.io





